❮ ❯

The unit is provided with quality factory installed actuators for both the return air and outside air dampers. Belimo is the preferred vendor for the actuators. All actuators are liberally sized for the torque- ft-lbs required.

1. Full Modulation Highest Quality Belimo Actuators

❮ ❯

Closeup view of the 2” MERV8 + Merv 13 Filters. These are front loaded filters for ease of maintenance.

FEATURES (CLOSEUP VIEW)
1. Full Face Dampers
2. Extruded Aluminum Blades w/ edge seals
3. Aluminum Frame

❮ ❯

High quality extruded aluminum dampers with blades seals and bearing rods

FEATURES (CLOSEUP VIEW)
1. Opposed Blade actuation operation

❮ ❯

The 3-tier hood design allows for maximum surface area for intake air with low pressure drop. In each tier is a 1” aluminum washable filter. All hoods are shipped factory assemble usually in the return section to protect against damage. Each hood is fastened to the unit with stainless steel mounting bolts in lieu of less expensive self-tapping screws

FEATURES
1. 3 Tier hood design
2. Side supports rails for maximum strength
3. full 1.5” mounting flanges
4. Factory Assembled Hoods

❮ ❯

The unit uses machined screws in lieu of lesser quality self-tapping screws. Machined screws will last longer and provide a more rigid assembly.

FEATURES (Closeup View)
1. Machined Support bolts in lieu of sheet
metals screws

❮ ❯



FEATURES
1. Unit can be provided with Exhaust Air Filters if requested

❮ ❯

This picture shows the all-aluminum filter provided with the unit. This is a long lasting filter than can be washed for many years to come. These are easy to remove and do an excellent job of pre -filtration.

FEATURES (CLOSEUP VIEW)
1. Close up view of the 1” inch filter